Subaru 2002 IMPREZA Service Manual page 752

FUEL INJECTION (FUEL SYSTEMS)
13) Disconnect the air by-pass hose (A) from purge
control solenoid valve.
14) Remove the harness bands (A) and harness
bracket (B) which hold engine harness onto intake
manifold.
15) Remove the engine harness from intake mani-
fold.
16) Remove the purge control solenoid valve.
17) Remove the bolt which installs injector pipe on
intake manifold as shown in the figure.
INTAKE MANIFOLD
(A)
EN1003
B2M4271A
B2M3487
H2M2965
FU(w/oOBD)-24
18) Remove the bolt which installs injector pipe on
intake manifold.
19) Remove the two bolts which hold fuel pipes on
the left side of intake manifold.
20) Remove the fuel injectors.
(1) Remove the fuel injector securing clip.
(2) Remove the fuel injector while lifting up the
fuel injector pipe.
H2M2966
B2M4272
H2M2969
H2M2970