Subaru 2002 IMPREZA Service Manual page 1001

2) Set the fuel tank and temporarily tighten the
bolts of fuel tank bands.
WARNING:
A helper is required to perform this work.
3) Connect the two-way valve hose (A) to two-way
valve and connect the canister hose (B) to canister.
(A)
4) Connect the fuel filler hose and air vent hose.
5) Connect the fuel hoses, and secure them with
clips and quick connector. <Ref. to FU(TURBO)-
69, INSTALLATION, Fuel Delivery, Return and
Evaporation Lines.>
FUEL TANK
EN0541
(B)
EN0840
EN0539
EN0540
FU(TURBO)-55
FUEL INJECTION (FUEL SYSTEMS)
6) Tighten the band mounting bolts.
Tightening torque:
33 N·m (3.4 kgf-m, 24.3 ft-lb)
7) Install the rear crossmember. <Ref. to RS-21,
INSTALLATION, Rear Crossmember.>
8) Connect the connector (A) to fuel tank cord and
plug the service hole with grommet (B).
(A)
9) Set the rear seat and floor mat.
10) Connect the connector to fuel pump relay.
C: INSPECTION
1) Make sure there are no cracks, holes, or other
damage on the fuel tank.
2) Make sure that the fuel hoses and fuel pipes are
not cracked and that connections are tight.
EN0541
(B)
EN0537
EN0344