Subaru 2002 IMPREZA Service Manual page 1015

FUEL DELIVERY, RETURN AND EVAPORATION LINES
9) Separate the quick connector on fuel delivery
and return line.
(1) Clean the pipe and connector, if they are
covered with dust.
(2) Hold the connector (A) and push retainer (B)
down.
(3) Pull out the connector (A) from retainer (B).
NOTE:
Replace the retainer with new ones.
(A) Connector
(B) Retainer
(C) Pipe
B: INSTALLATION
1) Connect the quick connector on fuel delivery and
return line.
NOTE:
• Always use a new retainer.
• Make sure that the connected portion is not dam-
aged or has dust. If necessary, clean the seal sur-
face of pipe.
(1) Set the new retainer (B) to connector (A).
(2) Push the pipe into connector completely.
NOTE:
At this time, two clicking sounds are heard.
S2M0228A
CAUTION:
• Pull the connector to ensure it is connected
securely.
• Ensure the two retainer pawls are engaged in
their mating positions in the connector.
• Be sure to inspect the hoses and their con-
nections for any leakage of fuel.
S2M0229A
FU(TURBO)-69
FUEL INJECTION (FUEL SYSTEMS)
(A) Connector
(B) Retainer
(C) Pipe
(A) Connector
(B) Retainer
(C) Pipe
S2M0230A
S2M0231A