Subaru 2002 IMPREZA Service Manual page 757

20) Install the intake air temperature and pressure
sensor.
Tightening torque:
3.4 N·m (0.35 kgf-m, 2.5 ft-lb)
NOTE:
Replace the O-ring with a new one.
21) Connect the connector to intake air tempera-
ture and pressure sensor.
22) Connect the connectors to throttle position sen-
sor and idle air control solenoid valve.
23) Install the ignition coil and ignitor assembly.
24) Connect the connector to ignition coil and igni-
tor assembly.
INTAKE MANIFOLD
25) Install the engine ground cable to intake mani-
fold.
Tightening torque:
19 N·m (1.9 kgf-m, 14.0 ft-lb)
H2M2960
E: INSPECTION
Make sure the fuel pipe and fuel hoses are not
cracked and that connections are tight.
H2M2999
H2M2958
FU(w/oOBD)-29
FUEL INJECTION (FUEL SYSTEMS)
B2M4265