FUEL INJECTION (FUEL SYSTEMS)
D: ASSEMBLY
1) Install the fuel pipe assembly (B) and pressure
regulator (A), etc. to intake manifold.
2) Tighten the bolt which installs fuel pipes on in-
take manifold.
Tightening torque:
5.0 N·m (0.51 kgf-m, 3.7 ft-lb)
3) Connect the right side fuel hose to injector pipe,
and tighten the clamp screw.
4) Install the fuel injector pipe.
INTAKE MANIFOLD
5) Connect the left side fuel hose to injector pipe,
and then tighten the clamp screw.
H2M2976A
6) Install the fuel injectors.
NOTE:
Always use new O-rings.
H2M2974
NOTE:
Do not forget to install the fuel injector securing clip.
B2M4274
H2M2975
FU(w/oOBD)-26
(A) O-ring
(B) Fuel injector
(C) Intake manifold protector
B2M4289
B2M3372A
H2M2969