Subaru 2002 IMPREZA Service Manual page 1004

FUEL INJECTION (FUEL SYSTEMS)
6) Insert the fuel filler hose (A) approx. 35 to 40 mm
(1.38 to 1.57 in) over the lower end of fuel filler pipe
and tighten the clamp.
CAUTION:
Do not allow clips to touch the air vent hose (B)
and rear suspension crossmember.
(B)
7) Insert the air vent hose approx. 25 to 30 mm
(0.98 to 1.18 in) into the lower end of air vent pipe
and hold clip.
L = 27.5 ± ± ± ± 2.5 mm (1.083 ± ± ± ± 0.098 in)
(1) Hose
(2) Clip
(3) Pipe
8) Tighten the bolt which holds fuel filler pipe brack-
et on body.
Tightening torque:
7.4 N·m (0.75 kgf-m, 5.4 ft-lb)
FUEL FILLER PIPE
(A)
EN0548
B2M1195A
EN0547
FU(TURBO)-58
9) Tighten the bolts which hold evaporation hoses
onto clip of fuel filler pipe.
10) Install the fuel filler pipe protector.
11) Install the rear right wheel.
12) Lower the vehicle.
13) Tighten the wheel nuts.
14) Connect the connector to fuel pump relay.
EN0545
EN0544
B2M1748
EN0344