Subaru 2002 IMPREZA Service Manual page 973

15) Connect the connector to purge control sole-
noid valve.
16) Connect the connector to tumble generator
valve sensor.
17) Connect the connector to tumble generator
valve actuator.
18) Connect the connector to fuel injector.
INTAKE MANIFOLD
19) Install the throttle body to intake manifold.
NOTE:
Replace the gasket with a new one.
Tightening torque:
22 N·m (2.2 kgf-m, 16.2 ft-lb)
EN0801
20) Connect the connector to the throttle position
sensor (A), idle air control solenoid valve (B) and
pressure sensor (C).
21) Connect the engine harness with clip (D) to the
intake manifold.
EN0800
EN0799
EN0798
FU(TURBO)-27
FUEL INJECTION (FUEL SYSTEMS)
S2M2249A
EN0785