INTAKE AIR TEMPERATURE AND PRESSURE SENSOR
FUEL INJECTION (FUEL SYSTEMS)
9. Intake Air Temperature and
Pressure Sensor
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Disconnect the spark plug cord from ignition coil
and ignitor assembly.
3) Disconnect the connector from intake air tem-
perature and pressure sensor.
4) Remove the intake air temperature and pressure
sensor.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
3.4 N·m (0.35 kgf-m, 2.5 ft-lb)
G6M0095
NOTE:
Replace the O-ring with a new one.
B2M3373
H2M2981
H2M2982
FU(w/oOBD)-38
H2M2982
H2M2999