FUEL INJECTION (FUEL SYSTEMS)
(5) Install the front side V-belt. <Ref. to ME-44,
INSTALLATION, V-belt.>
(6) Install the resonator chamber.
Tightening torque:
33 N·m (3.4 kgf-m, 24.3 ft-lb)
14) Connect the accelerator cable (A).
15) Connect the cruise control cable (B). (With
cruise control models)
16) Install the air intake duct and air cleaner as-
sembly. <Ref. to IN-7, INSTALLATION, Air Intake
Duct.> and <Ref. to IN-6, INSTALLATION, Air
Cleaner Case.>
17) Connect the connector to fuel pump relay.
INTAKE MANIFOLD
18) Connect the battery ground cable to battery.
C: DISASSEMBLY
1) Disconnect the engine ground cable from intake
manifold.
B6M1237
2) Disconnect the connector from ignition coil and
ignitor assembly.
B2M4254A
3) Remove the ignition coil and ignitor assembly.
EN0344
FU(w/oOBD)-22
G6M0095
B2M4265
H2M2957
H2M2958