Subaru 2002 IMPREZA Service Manual page 964

FUEL INJECTION (FUEL SYSTEMS)
B: INSTALLATION
1) Install the intake manifold onto cylinder heads.
NOTE:
Always use new gaskets.
Tightening torque:
25 N·m (2.5 kgf-m, 18.4 ft-lb)
2) Connect the fuel delivery hose, return hose, and
evaporation hose.
3) Connect the connector to the oil pressure switch
(B), crankshaft position sensor (C) and engine
coolant temperature sensor (A).
(B)
INTAKE MANIFOLD
4) Connect the connector to knock sensor.
5) Connect the connector to camshaft position sen-
sor.
EN0792
6) Connect the connector to ignition coil.
EN0214
(A)
7) Connect the engine harness with clip (A) to the
bracket.
(C)
EN0790
FU(TURBO)-18
S2M1613
B2M1251
EN0854
S2M2256A