CHAPTER 8
Connecting the SRX5400 Services
Gateway
Tools and Parts Required for SRX5400 Services Gateway Connections
Related
Documentation
Copyright © 2014, Juniper Networks, Inc.
Tools and Parts Required for SRX5400 Services Gateway Connections on page 57
Connecting the SRX5400 Services Gateway to Management and Alarm
Devices on page 58
To connect the device to management devices and to power on the device, you need
the following tools and parts:
Phillips (+) screwdrivers, numbers 1 and 2
2.5-mm flat-blade (-) screwdriver
2.5-mm Phillips (+) screwdriver
Wire cutters
Pliers
Electrostatic discharge (ESD) grounding wrist strap
Overview of Installing the SRX5400 Services Gateway on page 33
Connecting the SRX5400 Services Gateway to a Network for Out-of-Band Management
on page 58
Connecting the SRX5400 Services Gateway to a Management Console or an Auxiliary
Device on page 59
Connecting an SRX5400 Services Gateway to an External Alarm-Reporting Device on
page 60
Connecting Network Cables to SRX5400 Services Gateway MICs on page 61
57