Figure 3.29 [Mode] Window (Example) - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
CHAPTER 3 Work before Operating System Installation
E110EN). If the boot device has not been recognized by the UEFI, use the [Boot Manager] menu to have it
recognize the Boot device.
The following describes how to configure POST and set Mirror mode and POST from the MMB Web-UI.
Operations
1. Click [Partition] - [Partition#x] - [Mode].
>> The [Mode] window appears. For details on the [Mode] window, see [Mode] window in the
PRIMEQUEST 1000 Series Tool Reference (C122-E110EN).

FIGURE 3.29 [Mode] window (example)

Remarks
The window displays the [PSA] menu only in the PRIMEQUEST 1800E.
The PRIMEQUEST 1800E2 does not display TPM.
2. Set Mirror mode, and configure POST.
3. Click the [Apply] button.
>> A confirmation dialog box appears.
4. Click the [OK] button.
Remarks
To enable the new settings in the [Mode] window, you need to power off and on the partition.
54 C122-E107-09EN