Synchronization Interval Setting; Figure F.8 [Internet Time Settings] Window; Figure F.9 [Run] Window; Figure F.10 [Registry Editor] Window - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
APPENDIX F Setting up the NTP Server (Windows)

FIGURE F.8 [Internet Time Settings] window

4. Click the [OK] button to close the [Internet Time Settings] dialog box.
5. Click the [OK] button to close the [Date and Time] dialog box.
F.3.2

Synchronization Interval Setting

1. Select [Start] - [Run]. Enter "regedit.exe" in the dialog box, and click the [OK] button.
The Registry Editor appears.

FIGURE F.9 [Run] window

2. Open the following key, and set 900 for the SpecialPollInterval value.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time
\TimeProviders\NtpClient
"SpetcialPollInterval" Type: REG_DWORD, Data: 900 (decimal)

FIGURE F.10 [Registry Editor] window

3. Close the Registry Editor.
290 C122-E107-09EN