Chapter 6 Work After Operating System Installation (Primequest 1800E) - Fujitsu PRIMEQUEST 1000 Series Installation Manual

CHAPTER 6
This chapter describes how to make PSA and other settings after
operating system installation on the PRIMEQUEST 1800E.
6.1 Types of Work
6.2 Configuring PSA (Linux: Red Hat Enterprise Linux)
129
6.3 Configuring PSA (Windows Server 2003)
6.4 Configuring PSA (Windows Server 2008)
6.5 Setting Up the Dump Environment (Windows)
6.6 Setting Up the Dump Environment (Linux)
6.7 Configuring the NTP Client
6.8 Saving Management and Configuration Information
194
6.9 Configuring Service Life Monitoring by RAS Support
Service
6.10 Recovery Procedure after the Execution of the Simple
Setup Tool (editconf.sh)
Work after Operating
System Installation
(PRIMEQUEST 1800E)
.......................................................... 128
...................................... 193
................................................................ 199
...................................... 202
....
................ 149
................ 163
......... 191
............... 192
....