Fujitsu PRIMEQUEST 1000 Series Installation Manual page 295

PRIMEQUEST 1000 Series Installation Manual
APPENDIX E Notes on VMware Installation
4. Execute the following command.
# ./hrm_install_sr.sh
5. When the following message appears, press the [N] key.
Select HRM Install Mode : Use PRIMEQUEST Server Agent? [Y/N]: N
For PRIMEQUEST 1800E
The procedure differs depending on whether ServerView Suite DVD1 has the HRM/SR_Linux/FJSVhrmsr.tgz.
See the respective procedure for each of the following:
- HRM/SR_Linux/FJSVhrmsr.tgz is not available
- HRM/SR_Linux/FJSVhrmsr.tgz is not available, and HRM/Linux/FJSVhrm.tgz is available
- HRM/SR_Linux/FJSVhrmsr.tgz is available
1. Start the terminal with root privileges.
2. Mount ServerView Suite DVD1.
3. Copy the HRM/server module to any directory of the PRIMEQUEST 1000 series server. Then, expand the
files.
# cp MNT/SVSLocalTools/Japanese/HRM/SR_Linux/ \
FJSVhrmsr.tgz /tmp
MNT is the mount point.
\: This indicates that there is no line feed.
In the above example, the "any directory" is /tmp.
# cd /tmp
# tar xvzf FJSVhrmsr.tgz
4. Execute the following command.
# ./hrm_install.sh
5. When the following message appears, press the [Y] key
Select HRM Install Mode : Use PRIMEQUEST Server Agent? [Y/N]: Y
- When HRM/SR_Linux/FJSVhrmsr.tgz is not available and HRM/Linux/FJSVhrm.tgz is available
1. Start the terminal with root privileges.
267 C122-E107-09EN