Setting A Home Sb; Figure 3.23 [Remove Sb/Iob/Gspb From Partition] Window (Example) - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
CHAPTER 3 Work before Operating System Installation

FIGURE 3.23 [Remove SB/IOB/GSPB from Partition] window (example)

4. Click the radio button of an SB, IOB, or GSPB to remove it from the partition.
Only one SB, IOB, or GSPB can be selected at a time.
5. Click the [Apply] button.
>> A confirmation dialog box appears.
6. Click the [OK] button.
>> The partition releases the selected SB, IOB, or GSPB, which becomes free.
3.4.2

Setting a Home SB

The Home SB in each partition is only one type of SB in the partition. The first SB incorporated in a partition is
automaticallyset as the Home SB.
If the Home SB is deleted, the SB that is configured inthe partition, has not degraded, and has the smallest physical
number isautomatically set as the Home SB.
You can use the USB port and VGA port as external connectors of the Home SB.
If you want to change the Home SB, specify the change with the Web-UI. For details on the Home SB, see 5.2.4
Home SB in the PRIMEQUEST 1000 Series General Description (C122-B022EN).
Remarks
Windows license verification may be required depending on the combination of the SB and enable kit. For details,
see "License authentication with SB and enable kit combinations" in 3.4 Adding Components in the PRIMEQUEST
1000 Series Administration Manual (C122-E108EN).
Operations
1. Click [Partition] - [Partition Configuration] - [Home].
46 C122-E107-09EN