Figure 1.49 [Mode] Window - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations
(2) Window operations
None
Messages
The following table lists the messages displayed in this window.
Message number
I_00222
I_00417
W_00413
W_00472
W_00473
[Mode] window
You can set the mode of a partition in the [Mode] window. To enable the specified values, you need to power off
and on the partition.

FIGURE 1.49 [Mode] window

If you click the [Apply] button while the partition power is on, a warning dialog box appears with the message
"W_00487 Unable to change the mode, because this partition is powered on."
To enable the specified values without this dialog box appearing, click the [Apply] button while the partition power
is off.
If you attempt to set the Mirror mode for a partition for which an SB with a DIMM configuration that does not
satisfy the Mirror mode requirements is registered as a Reserved SB, a confirmation dialog box appears. The
confirmation dialog box displays a warning message that says the Mirror mode will be disabled when the switch
to the Reserved SB is made. This message asks if you are sure to continue the setting.
Unable to %aa the Partition#%aa because this Partition is under maintenance.
Are you sure?
Nothing is selected.
Unable to get the reserved WEB Session information due to WEB Session Max over.
Unable to select the option due to both options are disabled.
Message text
150 C122-E110-10EN