Configuring Security; Configuring Access Control - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
CHAPTER 7 Work after Installation
7.5

Configuring Security

This section describes how to make the necessary settings to ensure security and notification of errors during
operation.
Configure the security necessary for operation.
We recommend backing up the setting information after completing the following settings. For details on how to
back up the specified information, see
-

7.5.1 Configuring access control

- 7.5.2 Configuring SNMP
- 7.5.3 Configuring SSH
- 7.5.4 Configuring HTTPS
All screenshots are display examples, and the actually displayed contents vary depending on the system
configuration and other factors.
7.5.1 Configuring access control
To ensure MMB security, configure access control for the network protocol.
To ensure security, we recommend configuring it during installation. Access control can be configured even after
installation.
Selecting the filter to edit
Operations
1. Click [Network Configuration] - [Access Control].
The [Access Control] window appears. For details on the [Access Control] window, see 1.5.10 [Access
Control] window in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN).
3.5 Saving Configuration Information.
213 C122-E107-09EN