Installing Vmware 4.X Psa - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
APPENDIX E Notes on VMware Installation
2. Mount ServerView Suite DVD1.
3. Copy the HRM/server module to any directory of the PRIMEQUEST 1000 series server. Then, expand the
files.
# cp MNT/SVSLocalTools/Japanese/HRM/Linux/ \
FJSVhrm.tgz /tmp
MNTis the mount point.
\: This indicates that there is no line feed.
In the above example, the "any directory" is /tmp.
# cd /tmp
# tar xvzf FJSVhrmsr.tgz
4. Execute the following command.
# ./hrm_install.sh
5. When the following message appears, press the [Y] key
Select HRM Install Mode : Use PRIMEQUEST Server Agent? [Y/N]: Y
E.3.5

Installing VMware 4.x PSA

This section describes how to install PSA.
Remarks
PSA is provided only with the PRIMEQUEST 1800E.
1. Start the terminal with root privileges.
2. Mount ServerView Suite DVD1.
3. Copy the PSA module to any directory of the PRIMEQUEST 1000 series server. Then, expand the files.
# cp MNT/SVSLocalTools/Japanese/PSA/SR_Linux/\
FJSVpsa-XXXRHEL5.tgz
* MNT is the mount point.
\: This indicates that there is no line feed.
XXX depends on the version.
In the above example, the "any directory" is /tmp.
/tmp
268 C122-E107-09EN