Checks Before Psa Installation - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
APPENDIX B Manual PSA Installation and Uninstallation
- If the set value of the following registry key is less than 20000 (20 seconds), the system may hang during
operating system shutdown. Be sure to set a value equal to or greater than 20000 (20 seconds). The default
is 20000.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
\WaitToKillServiceTimeout
You can use the above registry key to specify the wait time (ms) before the service is terminated in the
shutdown sequence.
B.2.2

Checks before PSA installation

This section describes the checks to make before PSA installation.
Confirming PSA-to-MMB communication LAN settings
Confirming management LAN settings
Confirming the services required for PSA operation
Confirming PSA-to-MMB communication LAN settings
For details on how to confirm PSA-to-MMB communication LAN settings, see
MMB communication LAN.
Confirming management LAN settings
For details on how to confirm management LAN settings, see
Confirming the services required for PSA operation
SNMP Service is required for PSA operation. Confirm the installation of SNMP Service by using the following
procedure.
Remarks
These operations require the Windows installation DVD.
Operations
1. Select [Control Panel] - [Add or Remove Programs] - [Add/Remove Windows Components].
The Windows Component Wizard appears.
2. Select [Management and Monitoring Tools]. Then, click the [Details] button.
The [Management and Monitoring Tools] dialog box appears.
3. Confirm that the [Simple Network Management Protocol (SNMP)] check box is checked. Then, click the
[OK] button.
The screen returns to the Windows Component Wizard.
Remarks
If the check box is not checked, SNMP Service has not been installed. To install SNMP Service, check the
check box.
Click the [Next] button in the Windows Component Wizard window. Follow the instructions of the wizard
for installation.
6.3.1 Configuring the PSA-to-
6.3.2 Confirming management LAN
244
settings.
C122-E107-09EN