Configuring Https; Figure 7.10 [Network Protocols] Window (Example) - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
CHAPTER 7 Work after Installation

FIGURE 7.10 [Network Protocols] window (example)

2. Specify each item in [SSH].
3. Click the [Apply] button.
7.5.4

Configuring HTTPS

Configure HTTPS for the MMB. You can configure it with Administrator privileges.
To enable HTTPS, a valid SSL certificate must have been registered. If no valid SSL certificate is registered, any
attempt to enable HTTPS results in an error.
Specify a "verified certificate" as the valid SSL certificate. Alternatively, specify a "self-signed certificate" created
in the MMB window.
A Fujitsu certified service engineer may have already configured HTTPS. If no change is needed, proceed to the
next setting item.
Operations
1. Click [Network Configuration] - [Network Protocols].
The [Network Protocols] window appears. For details on the [Network Protocols] window, see 1.5.4
[Network Protocols] window in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN).
220 C122-E107-09EN