Connecting And Configuring The Mmb; Table 3.1 Mmb Connection And Configuration Flow - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
CHAPTER 3 Work before Operating System Installation
3.3

Connecting and Configuring the MMB

A field engineer will have constructed a test environment for the MMB to run test programs in it. Therefore, you
need to reconfigure the MMB to switch from the test environment to that for actual operation. Skip the steps for
items already set by the field engineer.
After connecting the MMB, perform the following from the MMB Web-UI:
- Registering a user account
- Configuring security
- Setting the time ... etc.
Connect and configure the MMB by using the following procedures.

TABLE 3.1 MMB connection and configuration flow

Procedure Item
Connecting the
1.
MMB console PC
Initializing MMB
2.
settings
Setting up the
connection
3.
environment for
actual operation
Logging in to the
4.
MMB
Configuring the
5. network for actual
operation
Initializing MMB
6.
settings
Description
Connect the MMB console PC to set up
the environment for actual operation.
Initialize MMB settings before setting
up the connection environment for
actual operation.
The MMB is set for a test connection.
Set up the connection environment for
actual operation.
Log in to the MMB.
There is also a description of the MMB
Web-UI window for reference.
The MMB is set for testing purposes,
so configure the network and Web
servers for actual operation. Make the
required settings appropriate to your
operation mode.
Initialize MMB settings.
- Registering a user account
- Setting the system name
- Setting the date and time
After you initialize the above settings,
we recommend backing up the setting
information. For details on how to back
up the specified information, see
Saving Configuration Information.
20
See
- 3.3.1 Connecting the
MMB console PC
- 3.3.2 Initializing MMB
settings
- 3.3.3 Setting up the
connection
environment for actual
operation
- 3.3.4 Logging in to the
MMB
- 3.3.5 How to view the
Web-UI window
- 3.3.6 Configuring the
MMB network
- 3.3.7 Configuring
telnet
- 3.3.8 Configuring a
DNS server
- 3.3.9 Configuring
Alarm E-Mail
- 3.3.10 Registering a
user account
- 3.3.11 Setting the
system name
- 3.3.12 Setting the date
and time
3.5
C122-E107-09EN