Figure E.2 [Watchdog] Tab In The Vmware 4.X Software Window; Figure E.3 [Server Configuration] Window - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
APPENDIX E Notes on VMware Installation
- Enter a value between 1 and 100 minutes for [Timeout].

FIGURE E.2 [Watchdog] tab in the VMware 4.x software window

6. Enter your user name and password, and press the [Enter] key.
When using SVOM 5.0 or later
1. Start ServerView Operations Manager.
2. Select [Server Configuration].

FIGURE E.3 [Server Configuration] window

3. Select the target partition in the server list on the left side.Wait a moment.
When the model name appears, click the [Go] button.
4. Select [Software Watchdog] in the displayed window.
5. Specify the following for [Software Watchdog Setting], and click the [Save Page] button.
- Check the [Activate] check box.
- Select [Continue] for [Action].
- Enter a value between 1 and 100 minutes for [Waiting time], and click the [Save Page] button.
263 C122-E107-09EN