Restarting The Partition; Settings After Psa Installation - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
APPENDIX B Manual PSA Installation and Uninstallation
Target
SELinux setting
B.1.5

Restarting the partition

After installing PSA, restart the partition with a reboot.
Syntax
/sbin/reboot
B.1.6

Settings after PSA installation

This section describes the settings after PSA installation.
Confirming SELinux function settings
Checking the firewall function (opening ports)
Setting the destinations of traps from a partition
Setting the destinations of traps and e-mail via the MMB
Configuring SNMP to use duplicate disks
Confirming SELinux function settings
For details on how to confirm SELinux function settings, see
Checking the firewall function (opening ports)
[For PSA version 2.5 or earlier]
The required firewall for the PSA-MMB communication LAN is automatically configured.
For details on how to check the firewall function, see
Checking the firewall function (opening
Also, the settings related to management LAN interfaces are required only for PRIMECLUSTER linkage. For the
setting procedure, see Management LAN interfaces
[For PSA version 2.6 or later]
For the required firewall for the PSA-MMB communication LAN and the management LAN, only a chain is
automatically configured.
Since the settings related to PSA-MMB communication LAN interfaces are essential, add the jump setting for the
chain for PSA-MMB communication (referred to below as the PSA-MMB_LAN chain) to INPUT and OUTPUT
chains in iptables manually. For the setting procedure, see
version 2.6 or later).
Also, the settings related to management LAN interfaces are required only for PRIMECLUSTER linkage. For the
setting procedure, see Management LAN interfaces
Note
Action
Add The policy module is added for RHEL6 or later only.
setting
6.2.3 Confirming SELinux function
PSA-to-MMB communication LAN interfaces
ports).
in 6.2.4 Checking the firewall function (opening
PSA-to-MMB communication LAN interfaces (for PSA
in 6.2.4 Checking the firewall function (opening
238
Remarks
settings.
in 6.2.4
ports).
ports).
C122-E107-09EN