Figure 7.7 [Snmp Community] Window (Example) - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
CHAPTER 7 Work after Installation
The [SNMP Community] window appears. For details on the [SNMP Community] window, see [SNMP
Community] window in 1.5.6 [SNMP Configuration] menu in the PRIMEQUEST 1000 Series Tool
Reference (C122-E110EN).

FIGURE 7.7 [SNMP Community] window (example)

2. Enter values in the required fields.
You can set up to 16 Community lines. Enter values for the specified community, accessible IP addresses,
SNMP version, access permission, and authentication.
To delete a line, clear the [Community] and [IP address] items.
3. Click the [Apply] button.
Setting SNMP trap destinations
Operations
1. Click [Network Configuration] - [SNMP Configuration] - [Trap].
The [SNMP Trap] window appears. For details on the [SNMP Trap] window, see [SNMP Trap] window in
1.5.6 [SNMP Configuration] menu in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN).
217 C122-E107-09EN