Figure 7.3 [Date/Time] Window (Example) - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
CHAPTER 7 Work after Installation
- When an error occurs regarding the maintenance time of the battery in a partition
Use either of the following ways to adjust the times.
- Adjust the time manually from the MMB Web-UI.
- Use the NTP client function of the MMB to adjust the time.
Remarks
If the NTP is not used, set the time in the operating system.
Operations
1. Click [Network Configuration] - [Date/Time].
The [Date/Time] window appears. For details on the [Date/Time] window, see 1.5.1 [Date/Time] window
in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN).

FIGURE 7.3 [Date/Time] window (example)

2. Click [Enable] for [NTP].
3. Enter the IP address of another NTP server.
NTP Server1: Specify the Primary NTP server.
NTP Server2: Specify the Secondary NTP server.
NTP Server3: Specify the Other (Tertiary) NTP server.
4. Click the [Apply] button.
The MMB ensures time synchronization with the NTP servers specified in [NTP Server1] to [NTP Server3].
209 C122-E107-09EN