Installing A Psa Update; Uninstalling Psa - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
APPENDIX B Manual PSA Installation and Uninstallation
ACCEPT
ACCEPT
ACCEPT
ACCEPT
ACCEPT
ACCEPT
ACCEPT
ACCEPT
4. Log in to the MMB Web-UI, and confirm that the PSA screen appears.
5. Save the firewall configuration.
# /sbin/service iptables save
Setting the destinations of traps from a partition
For details on how to set the destinations of traps from a partition, see
a partition.
Setting the destinations of traps and e-mail via the MMB
You can set the destinations of traps and mail sent via the MMB by using the Web-UI.
- For details on MMB trap destinations, see
- For details on e-mail destinations, see
Remarks
- Make settings only as needed.
- Operations management software, such as Systemwalker, needs these settings to manage events by partition.
Configuring SNMP to use duplicate disks
For details on how to configure SNMP to use duplicate disks, see
disks.
B.1.7

Installing a PSA update

For details on how to install a PSA update, see
B.1.8

Uninstalling PSA

For details on how to uninstall PSA, see
icmp -- 0.0.0.0/0
icmp -- 0.0.0.0/0
udp -- 0.0.0.0/0
udp -- 0.0.0.0/0
tcp -- 0.0.0.0/0
tcp -- 0.0.0.0/0
tcp -- 0.0.0.0/0
tcp -- 0.0.0.0/0
7.5.2 Configuring
3.3.9 Configuring Alarm
6.2.9 Installing a PSA
6.2.10 Uninstalling
0.0.0.0/0 icmp type 8
0.0.0.0/0 icmp type 0
0.0.0.0/0 udp dpt:161
0.0.0.0/0 udp spt:161
0.0.0.0/0 tcp dpt:24450
0.0.0.0/0 tcp spt:24450
0.0.0.0/0 tcp spt:5000
0.0.0.0/0 tcp dpt:5000
6.2.5 Setting the destinations of traps from
SNMP.
E-Mail.
6.2.8 Configuring SNMP to use duplicate
update.
PSA.
242 C122-E107-09EN