PRIMEQUEST 1000 Series Installation Manual
APPENDIX E Notes on VMware Installation
# cd /tmp
# tar xvzf FJSVpsa-XXXRHEL5.tar.gz
4. Execute the following command.
# cd FJSVpsa
#
./INSTALL.sh -SVIM
5. After the installation of PSA, make the required settings. For details on the setting method, see PSA Setting
Procedure for VMware and
E.3.6
Installing SVmco
For details on installing SVmco, see the SVmco manual.
6.2 Configuring PSA (Linux: Red Hat Enterprise
269
Linux).
C122-E107-09EN