Setting Various Modes; Figure 3.28 [Partition Configuration] Window (Example); Table 3.10 Setting Various Modes - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
CHAPTER 3 Work before Operating System Installation

FIGURE 3.28 [Partition Configuration] window (example)

Remarks
The above window shows the maximum configuration.
2. Select the partition to be assigned a partition name. Then, enter a partition name in its [Partition Name] cell.
Remarks
- You can enter a name consisting of up to 16 characters. You can use the following characters:
0 to 9, a to z, A to Z, en space ( ), and
# -_
3. Click the [Set Partition Name] button.
>> The MMB-Web UI sets the entered partition name.
3.4.5

Setting various modes

Set Mirror mode, Hyper Threading mode, and other modes for the partition. The MMB Web-UI and UEFI (Unified
Extensible Firmware Interface) windows have settings items for these settings. The following table lists the setting
items and the screen transitions. For details on each setting, see the PRIMEQUEST 1000 Series Tool
Reference (C122-E110EN).

TABLE 3.10 Setting various modes

Setting item
Mirror Mode
Screen Transitions
MMB Web-UI-[Partition]-
[Partition#x]-[Mode]
52
See (the PRIMEQUEST 1000 Series Tool
Reference (C122-E110EN))
1.3.7 [Partition#x] menu,
[Mode] window
C122-E107-09EN