PRIMEQUEST 1000 Series Installation Manual
CHAPTER 2 Preparing for Main Unit Installation
2.6
Preparing to Install the Main Unit
TABLE 2.1 Accessories required in main unit installation
Prepare these accessories in advance.
TABLE 2.1 Accessories required in main unit installation
Accessory name
No. 2 Phillips screwdriver
Wrist strap
Conductive mat
Ethernet Category 5 cable or better
Console PC-to-LAN cable (for user
LAN)
External switching hub
Multitester
lists the accessories required in main unit installation.
Used to mount the unit in a rack.
Used to prevent main unit damage from static electricity discharged from
your body.
Required for some system configurations. To order any of the accessories,
contact the distributor where you purchased your product, or your sales
representative.
Used to connect the PRIMEQUEST 1000 series server to an external
switching hub via a LAN.
Used to check the input AC voltage.
11
Description
C122-E107-09EN