Fujitsu PRIMEQUEST 1000 Series Installation Manual page 139

PRIMEQUEST 1000 Series Installation Manual
CHAPTER 4 Installing the Operating System and Bundled Software
Mode
system installation. This mode uses
Fujitsu's recommended settings.
Guide mode You can specify setup information by
following the instructions of the
wizard. You can save the specified
information in a configuration file for
use during reinstallation.
All screenshots are display examples, andthe actually displayed contents vary depending on the system
configuration andother factors.
Operations
1. Make the setting for booting the partitionfrom remote storage.
For details on the setting, see 1.6.3 Remote operation (BMC) in the PRIMEQUEST 1000 Series
Administration Manual (C122-E108EN).
2. Insert ServerView Suite DVD1 into the DVD drive. Then, power on the partition.
Remarks
You can boot from the DVD drive either byselecting [Force boot from DVD] from [Boot Selector], or by
specifying the DVDdrive as the highest-priority device to boot from, in UEFI mode.
If the operating system supports UEFI mode,you can install it in UEFI mode by using the following procedure
to change theboot order.
1. After powering on the partition, press and hold down any key ([Space] key, for example) other than
the [Enter] key while the FUJITSU logo is displayed, to display the Boot Manager Front Page.
2. Select the following items from the menu in the order given in theBoot Manager Front Page:
[Boot MaintenanceManager] - [Boot Options] - [Change Boot Order] - [Change the order]
- Specify [UEFI: DVD/CD 0] as the highest priority device to boot from the remote storage DVD.
- Specify [UEFI: Embedded DVD/CD] as the highest priority device to boot from the built-in
DVD.
For details on how to set the boot order, see Changing the order of priority (Change Boot Order) in
5.6.1 [Boot Options] menu in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN).
Functional outline
111
Remarks
This mode enables detailed
settings.
Use the mode if you want to
configure installation with
detailed RAID and OS settings.
C122-E107-09EN