Installing Vmware 4.X Hrm/Server (Primequest) - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
APPENDIX E Notes on VMware Installation
1. Start the terminal with root privileges.
2. Mount ServerView Suite DVD1.
3. Copy the RAS support service module to any directory of the PRIMEQUEST 1000 series, and extract it.
# cp MNT/SVSLocalTools/Japanese/RASAssist/Linux/\
LinuxRAS.tgz /tmp
# cd /tmp
# tar xvzf LinuxRAS.tgz
*: MNT is the mount point.
\: This indicates that there is no line feed.
In the above example, /tmp is an arbitrary directory.
4. Execute the following commands to install the expansion package (web server).
# cd MTEP
# ./install
# cd ..
5. Execute the following command to install the RAS support service.
# ./rasinstall
E.3.4

Installing VMware 4.x HRM/server (PRIMEQUEST)

This section describes how to install HRM/server (PRIMEQUEST)
For PRIMEQUEST 1800E2
1. Start the terminal with root privileges.
2. Mount ServerView Suite DVD1.
3. Copy the HRM/server module to any directory of the PRIMEQUEST 1000 series server. Then, expand the
files.
# cp MNT/SVSLocalTools/Japanese/HRM/Linux/\FJSVhrm.tgz /tmp
MNTis the mount point.
\: This indicates that there is no line feed.
In the above example, the "any directory" is /tmp.
# cd /tmp
# tar xvzf FJSVhrmsr.tgz
266 C122-E107-09EN