Settings After Psa Installation - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
APPENDIX B Manual PSA Installation and Uninstallation
B.3.5

Settings after PSA installation

This section describes the settings for items after PSA installation.
Setting the destinations of traps from a partition
Setting the destinations of traps and e-mail via the MMB
Configuring the Windows Firewall
Setting Watchdog for monitoring after a STOP error (fatal system error)
Installing the PSHED Plugin driver
Note
From [Properties] in the Event Viewer, do not change the operation in [When maximum log size is reached] for
the system log or application log to [Do not overwrite events (clear log manually)]. Otherwise, after the log reaches
the maximum log size, no errors are output to the log, so PSA will be unable to detect any errors.
Setting the destinations of traps from a partition
For details on how to set the destinations of traps from a partition, see
a partition.
Setting the destinations of traps and e-mail via the MMB
For details on how to set the destinations of traps and e-mail via the MMB, see
traps and e-mail via the MMB.
Configuring the Windows Firewall
For details on how to configure the Windows Firewall, see
Setting Watchdog for monitoring after a STOP error (fatal system error)
For details on how to set Watchdog for monitoring after a STOP error (fatal system error), see
Watchdog Timer for monitoring after a STOP error (fatal system
Installing the PSHED Plugin driver
For details on how to install the PSHED Plugin driver, see
6.4.4 Setting the destinations of traps from
6.4.5 Setting the destinations of
6.4.6 Configuring the Windows
error).
6.4.3 Installing the PSHED Plugin
255
Firewall.
6.4.7 Setting the
driver.
C122-E107-09EN