Figure 8.2 [Power Control] Window (Example) - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
CHAPTER 8 Powering On and Off a Partition

FIGURE 8.2 [Power Control] window (example)

3. Select [Power Off] in [Power Control] for the partition that you are going to power off. Then, click the [Apply]
button.
The power to the specified partition is turned off.
Remarks
If the operating system supports ACPI, selecting [Power Off] enables you to automatically power off the
partition after operating system shutdown. However, even if the operating system supports ACPI, you may
be unable to power off the partition as long as an application that does not support it is running on the operating
system. This depends on the specifications of the operating system and application. For details, see the manual
of the operating system or application.
If the operating system does not support ACPI, the power-off sequence powers off the partition without
shutting down the operating system.
For the above reason, be sure to shut down the operating system on the partition.
226 C122-E107-09EN