Configuring Alarm E-Mail; Figure 3.11 [Network Interface] Window (Example) - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
CHAPTER 3 Work before Operating System Installation
>> The [Network Interface] window appears. For details on the [Network Interface] window, see 1.5.2
[Network Interface] window in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN).

FIGURE 3.11 [Network Interface] window (example)

2. Click [Enable] for [DNS] in [DNS(optional)]. Then, enter a value for each item.
3. Specify the required fields. Then, click the [Apply] button.
3.3.9

Configuring Alarm E-Mail

Make the following Alarm E-Mail settings:
- Whether to send e-mail notification if an error occurs during operation
- Error level and send destination for such e-mail notification
For details on how to back up the specified information, see
Note
Log in with Administrator privileges to make these settings.
Operations
1. Click [Network Configuration] - [Alarm E-Mail].
>> The [Alarm E-Mail] window appears. For details on the [Alarm E-Mail] window, see 1.5.11 [Alarm E-
Mail] window in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN).
3.5 Saving Configuration
35
Information.
C122-E107-09EN