Installing A Psa Update - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E)
[NETWORK]
ManagementIP=192.168.0.1
Restart PSA to reflect the new NIC settings for the management LAN.
Restarting PSA
1. Click [Start] - [Administrative Tools] - [Services].
2. Select [PRIMEQUEST Server Agent] in the right side of the window.
3. Select [Action] - [Restart] from the menu bar to restart PRIMEQUEST Server Agent.
6.4.9

Installing a PSA update

This section describes the PSA update installation procedure.
Remarks
- Using a fix program of the same version as the installed PSA version:
PSA uninstallation begins when you click the [OK] button in the confirmation message dialog box. After
that, PSA is reinstalled.
- For details on how to acquire fix programs, contact the distributor where you purchased your product, or
your sales representative.
Operations
1. Save the fix program (fjpsaxxxx.exe) to your chosen folder.
2. Start the saved fix program.
>> The following window appears for installation preparations.
184 C122-E107-09EN