PRIMEQUEST 1000 Series Installation Manual
APPENDIX F Setting up the NTP Server (Windows)
F.5
NTP Settings in Windows Server 2012
The procedures in this chapter requireAdministrator privileges.
All screenshots are display examples, and the actually displayed contents vary depending on the system
configuration and other factors.
F.5.1
Specifying an NTP Server
1. Select [Control Panel] - [Set the time and date]. The [Date and Time] dialog box appears.
FIGURE F.37 [Date and Time] window (1)
2. Click the [Change settings] button on the [Internet Time] tab.
303
C122-E107-09EN