Types Of Work; Table 6.1 Types Of Work - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E)
6.1

Types of Work

TABLE 6.1 Types of work

TABLE 6.1 Types of work
Task Description
Configuring Configuring PSA for
PSA operation
Configuring Configuring PSA for
PSA operation
Configuring Configuring PSA for
PSA operation
Setting up the Setting up the dump
dump environment
environment
Setting up the Setting up the dump
dump environment
environment
Configuring an Configuring an NTP
NTP client client
Saving Saving PSA
management management
and information and
configuration UEFI configuration
information information
Setting service Setting service life
life monitoring monitoring of battery
by RAS units on RAID cards
Support and UPSs
Service
Recovery Recovery procedure
procedure after after the simple setup
the execution of of ServerView Linux
the simple setup agent
tool (including
(editconf.sh) PRIMEQUEST-
specific work)
lists the types and details of the work performed after operating system installation.
Installed operating system
Linux
Windows Server 2003
Windows Server 2008
Windows
Linux
Linux or Windows
Linux or Windows
Linux or Windows
Linux
6.2 Configuring PSA (Linux: Red
Hat Enterprise Linux)
6.3 Configuring PSA (Windows
Server 2003)
6.4 Configuring PSA (Windows
Server 2008)
6.5 Setting Up the Dump
Environment (Windows)
6.6 Setting Up the Dump
Environment (Linux)
6.7 Configuring the NTP Client
6.8 Saving Management and
Configuration Information
6.9 Configuring Service Life
Monitoring by RAS Support Service
6.10 Recovery Procedure after the
Execution of the Simple Setup Tool
(editconf.sh)
128
See
C122-E107-09EN