Configuring Bundled Software After The Completion Of Installation - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
CHAPTER 4 Installing the Operating System and Bundled Software
4.5.4

Configuring bundled software after the completion of installation

After completing installation of the operating system, configure the bundled software.
Remarks
Depending on the driver version, interpret HBAnyware as OneCommand Manager.
1. Install HBAnyware if the following applies:
- The FC card is installed,
and
- HBAnyware has not been installed.
The installation of HBAnyware can be confirmed by the existence of [Emulex] - [HBAnyware], which
is displayed by selecting [All Programs] from the [Start] menu.
1. Download the driver and utility of MC-0JFC11 or MC-0JFC21 from the following URL:
http://jp.fujitsu.com/platform/server/primequest/download/
Note
The downloaded binary file has a description about the PRIMERGY, but the driver and utility
can be used for the PRIMEQUEST 1000 series.
2. Execute the downloaded file by double-clicking it.
The prompt screen for the cmd.exe (a window with a black background) is displayed for a while,
and then the file is extracted.
3. After the extraction is completed, the window is automatically closed.
The downloaded file is extracted and folders or files are newly created.
Remark
If the window is not closed in spite of the display of "Installation Completed" in the window,
click the [Finish] button to close the window.
4. Double-click storportminiportkit_XXXXX.exe in the extracted FC_vXXXXXX directory to run
it.
Remark
"XXXXX" represents the version and must be replaced with a suitable character string.
2. Make the registry setting.
Remarks
No registry setting is required for Windows Server 2012.
1. Insert the "ServerView Suite DVD1" DVD into the DVD drive.
2. Double-click the file in the <DVD drive name>:\HotFixes\SR-IO folder to run it.
87 C122-E107-09EN