Powering On And Off A Partition; Powering On A Partition; Figure 8.1 [Power Control] Window (Example) - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
CHAPTER 8 Powering On and Off a Partition
8.1

Powering On and Off a Partition

This section describes how to power on and power off partitions.
-

8.1.1 Powering on a partition

- 8.1.2 Powering off a partition
You can power on or off a partition from a Partition Operator account with Administrator or Operator privileges
for the partition.
All screenshots are display examples, and the actually displayed contents vary depending on the system
configuration and other factors.
8.1.1 Powering on a partition
The procedure for powering on the partition is as follows.
Operations
1. Log in to the MMB Web-UI.
The [MMB Web-UI] window appears.
2. Click [Partition] - [Power Control].
The [Power Control] window appears. For details on the [Power Control] window, see 1.3.1 [Power Control]
window in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN).

FIGURE 8.1 [Power Control] window (example)

3. Select [Power On] in [Power Control] for the partition that you are going to power on. Then, click the [Apply]
button.
224 C122-E107-09EN