Settings After Psa Installation; Installing A Psa Update; Uninstalling Psa - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
APPENDIX B Manual PSA Installation and Uninstallation
- With [Accept SNMP packets from any host] selected:
SNMP security is not configured.
- With [Accept SNMP packets from these hosts] selected:
If neither the MMB IP address nor localhost is set, SNMP security is configured.
WMI (Windows Management Instrumentation) settings
PSA uses WMI to acquire information on PCI Express cards and SCSI devices. WMI is installed as standard with
Windows.
These settings include settings on the size of memory and number of internal handles used by WMI to collect this
information. If the system has many LUNs for devices such as RAIDs, it may not have sufficient memory or internal
handles. For this reason, the settings are changed to the following values:
- Upper limit on memory used: 536,870,912 bytes
- Upper limit on internal handles: 65,536
B.2.5

Settings after PSA installation

This section describes the settings for items after PSA installation.
Setting the destinations of traps from a partition
Setting the destinations of traps and e-mail via the MMB
Configuring the Windows Firewall
Setting Watchdog for monitoring after a STOP error (fatal system error)
Setting the destinations of traps from a partition
For details on how to set the destinations of traps from a partition, see
a partition.
Setting the destinations of traps and e-mail via the MMB
For details on how to set the destinations of traps and e-mail via the MMB, see
traps and e-mail via the MMB.
Configuring the Windows Firewall
For details on how to configure the Windows Firewall, see
Setting Watchdog for monitoring after a STOP error (fatal system error)
For details on how to set Watchdog for monitoring after a STOP error (fatal system error), see
Watchdog Timer for monitoring after a STOP error (fatal system
B.2.6

Installing a PSA update

For details on how to install a PSA update, see
B.2.7

Uninstalling PSA

For details on how to uninstall PSA, see
6.3.5 Configuring the Windows
error).
6.3.8 Installing a PSA
6.3.9 Uninstalling PSA.
248
6.3.3 Setting the destinations of traps from
6.3.4 Setting the destinations of
Firewall.
6.3.6 Setting the
update.
C122-E107-09EN