Ntp Settings In Windows Server 2008; Specifying An Ntp Server; Figure F.6 [Date And Time] Window; Figure F.7 [Date And Time] Window - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
APPENDIX F Setting up the NTP Server (Windows)
F.3

NTP Settings in Windows Server 2008

The procedures in this chapter require Administrator privileges.
All screenshots are display examples, and the actually displayed contents vary depending on the system
configuration and other factors.
F.3.1

Specifying an NTP Server

1. Select [Control Panel] - [Date and Time]. The [Date and Time] dialog box appears.

FIGURE F.6 [Date and Time] window (1)

2. Click the [Change settings] button on the [Internet Time] tab.

FIGURE F.7 [Date and Time] window (2)

3. Set the following parameters in the [Internet Time Settings] dialog box.
- [Synchronize with an Internet time server]: Check the check box.
- [Server]: Enter an NTP server name.
289 C122-E107-09EN