Duplicate Network Adapter Configuration; Figure 7.1 External Network Configuration - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
CHAPTER 7 Work after Installation
7.1

Duplicate Network Adapter Configuration

For the network configuration after installation, make teaming (multipath) settings as follows by using a utility
compatible with each network adapter.
Network adapter (Intel Gigabit Ethernet (GbE)) settings
Make the network redundancy settings for the management LAN and production LAN. The target networks are
shown in (2) in the following figure.
For Windows, configure teaming using Intel PROSet(R) (*1). For details, see the help for Intel PROSet(R).
*1 NIC teaming, a standard operating system function, is available in Windows Server 2012 or later.
No.
(1) SW redundancy
(2) Redundancy by teaming (GLS or equivalent)
(3) Disabled on the standby side

FIGURE 7.1 External network configuration

Note
There are some precautions on teaming with Intel PROSet(R). For details on the precautions, see APPENDIX G.
8 NIC (Network Interface Card) in the PRIMEQUEST 1000 Series Administration Manual (C122-E108EN).
Description
206 C122-E107-09EN