PRIMEQUEST 1000 Series Installation Manual
APPENDIX B Manual PSA Installation and Uninstallation
FIGURE B.9 Installation complete window
B.3.4
Automatic configuration during PSA installation
This section describes the values automatically set for PSA operation during PSA installation.
Service settings
- PRIMEQUEST Server Agent
- PRIMEQUEST PEM Command Service
- PRIMEQUEST PSA Environment Control Service
Environment variable settings
- PATH variables
The values used for PSA are added to existing PATH variables.
- FJSVpsa_INSTALLPATH variable
A new variable is added.
Port setting
The TCP:24450 port is set for use by PSA.
SNMP security settings
The PSA installation configures SNMP Service security because PSA needs to accept SNMP packets from the
MMB.
The settings depend on the selected items on the [Security] tab in the [SNMP Service Properties] dialog box during
PSA installation.
- With [Accept SNMP packets from any host] selected:
SNMP security is not configured.
- With [Accept SNMP packets from these hosts] selected:
If neither the MMB IP address nor localhost is set, SNMP security is configured.
254
C122-E107-09EN