Checks Before Psa Installation - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
APPENDIX B Manual PSA Installation and Uninstallation
You can use the above registry key to specify the wait time (ms) before the service is terminated in the
shutdown sequence.
- The event log may have the following message recorded during PSA startup. It does not indicate any
operational problem.
"PM child process abnormal end [6:750] (tagt) 1:0x00000000"
FJSVpsa Event ID 62
B.3.2

Checks before PSA installation

This section describes the checks to make before PSA installation.
Confirming PSA-to-MMB communication LAN settings
Confirming the services required for PSA operation
Confirming PSA-to-MMB communication LAN settings
For details on how to configure the PSA-to-MMB communication LAN, see
communication LAN
Confirming the services required for PSA operation
SNMP Service is required for PSA operation. Add SNMP Service by using the following procedure.
Operations
1. Click [Start] - [Administrative Tools] - [Server Manager].
2. Select [Features] - [Add Function] - [SNMP Service] in the [Server Manager] window.
3. Confirm that the [SNMP Service] check box is checked. Then, click the [OK] button.
The screen returns to the Windows Component Wizard.
Remarks
If the check box is not checked, SNMP Service has not been installed. To install SNMP Service, check the
check box.
Click the [Next] button in the Windows Component Wizard window. Follow the instructions of the wizard
for installation.
6.4.1 Configuring the PSA-to-MMB
250 C122-E107-09EN