Confirming The Software And Firmware Configurations - Fujitsu M10-4 Service Manual

Enclosure#
Logical ID
Numslots
StartSlot
------------------------------------------------------------------------
SAS2IRCU: Command DISPLAY Completed Successfully.
SAS2IRCU: Utility Completed Successfully.
*1 SAS controller information
*2 RAID volume information
*3 Physical device information
*4 Information about the body of the SPARC M10 server
4.1.2 Confirming the software and firmware
configurations
The software and firmware configurations and versions affect system operation. To
change the configuration or investigate a problem, check the latest state and check for
any problems in the software.
Confirming the software configuration
Use Oracle Solaris commands to check the software configuration.
If you are logged in to the XSCF console, switch to the control domain console by
executing the console command beforehand.
Table 4-1
Table 4-1 Commands for checking the software configuration
Command
pkg (Oracle Solaris 11)
showrev (Oracle Solaris 10)
ldm
Log in to the control domain console of the physical partition where the FRU
1.
requiring maintenance is mounted.
For details on how to log in to the control domain console, see "8.3 Switching to
the Control Domain Console From the XSCF Shell" in the Fujitsu SPARC M12 and
Fujitsu M10/SPARC M10 System Operation and Administration Guide.
Execute the pkg command to display the Oracle Solaris patch information and
2.
version.
- For Oracle Solaris 11, execute the pkg command.
46 Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ June 2023
lists the commands used for checking the software configuration.
: 2
: 500000e0:e06d307f
: 9
: 0
Description
Displays the Oracle Solaris patch information and
version.
Displays logical domain configuration information.