Figure 4.19 [Sending Software Configuration Information] Window - Fujitsu Primequest 2000 Series Installation Manual

CHAPTER 4 REMCS Service Operations
4.2 REMCS Service Menu
1. Click the [Send] button.
A confirmation dialog box appears. Send the software configuration information to the REMCS Center.
After processing completes, a pop-up window appears with the results. Then, the window shown in
FIGURE 4.1 [REMCS initial] window
Remarks
It may take some time before the software configuration information of the partition takes effect. Therefore,
the latest information may not be displayed immediately after the software replacement.

FIGURE 4.19 [Sending Software Configuration Information] window

appears.
43
CA92344-0542-02