Chapter 89 Rspan Commands - D-Link xStack Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Chapter 89
enable rspan
disable rspan
create rspan vlan [vlan_name <vlan_name> | vlan_id <vlanid 1-4094>]
delete rspan vlan [vlan_name <vlan_name> | vlan_id <vlanid 1-4094>]
config rspan vlan [vlan_name <vlan_name> | vlan_id <vlanid 1-4094>] [redirect [add | delete]
ports <portlist> | source {[mirror_group_id <value 1-4> | [add | delete] ports <portlist> [rx | tx |
both]]}]
show rspan {[vlan_name <vlan_name> | vlan_id <vlanid 1-4094>]}
89-1 enable rspan
Description
This command is used to enable RSPAN globally.
Format
enable rspan
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable RSPAN globally:
DGS-3620-28SC:admin#enable rspan
Command: enable rspan
Success.
DGS-3620-28SC:admin#
89-2 disable rspan
Description
This command is used to disable RSPAN globally.
Format
disable rspan
RSPAN Commands
1016