Show - Cisco MWR 2941 Command Reference Manual

show

show
To verify the Multiple Spanning Tree (MST) configuration, use the show command in MST
configuration mode.
Syntax Description current
pending
Command Default
None
Command Modes
MST configuration (config-mst)
Command History Release
12.2(14)SX
12.2(17d)SXB
12.2(33)SRA
15.0(1)MR
Usage Guidelines
The display output from the show pending command is the edited configuration that will replace the
current configuration if you enter the exit command to exit MST configuration mode.
Entering the show command with no arguments displays the pending configurations.
Examples This example shows how to display the edited configuration:
Router# configure terminal
Router(config)# spanning-tree mst configuration
Router(config-mst)# show pending
Pending MST configuration
Name
Version
Instance
-------- ---------------------------------------------------------------------
0
2
3
------------------------------------------------------------------------------
Router(config-mst)#
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
454
show [current | pending]
(Optional) Displays the current configuration that is used to run MST.
(Optional) Displays the edited configuration that will replace the current configuration.
Modification
Support for this command was introduced on the Supervisor Engine 720.
Support for this command on the Supervisor Engine 2 was extended to
Release 12.2(17d)SXB.
This command was integrated into Cisco IOS Release 12.2(33)SRA.
This command was integrated into Cisco IOS Release 15.0(1)MR.
[zorglub]
31415
Vlans Mapped
4001-4096
1010, 1020, 1030, 1040, 1050, 1060, 1070, 1080, 1090, 1100, 1110
1120
1-1009, 1011-1019, 1021-1029, 1031-1039, 1041-1049, 1051-1059
1061-1069, 1071-1079, 1081-1089, 1091-1099, 1101-1109, 1111-1119
1121-4000
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01