Show Ethernet Cfm Maintenance-Points Local - Cisco MWR 2941 Command Reference Manual

show ethernet cfm maintenance-points local

show ethernet cfm maintenance-points local
To display information about maintenance points configured on a device, use the show ethernet cfm
maintenance-points local command in privileged EXEC mode.
Syntax Description
detail
mep
mip
domain
domain-name
interface
type number
level
level-id
Command Default
When none of the optional keywords and arguments are specified, information about all the maintenance
points on the device is shown.
Command Modes
Privileged EXEC (#)
Command History Release
12.2(33)SRA
12.4(11)T
12.2(33)SXH
12.2(33)SRD
12.2(33)SXI2
12.2(33)MRA
15.0(1)MR
Usage Guidelines The show ethernet cfm maintenance-points local command allows you to filter output. You can
display information about maintenance points as follows:
•
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
496
show ethernet cfm maintenance-points local [detail] [mep | mip] [domain domain-name |
interface type number | level level-id]
(Optional) Indicates that detailed output is specified.
(Optional) Indicates that a maintenance endpoint (MEP) is specified.
(Optional) Indicates that a maintenance intermediate point (MIP) is
specified.
(Optional) Indicates that a maintenance domain is specified.
(Optional) String of a maximum of 154 characters.
(Optional) Indicates that an interface is specified.
(Optional) Type and number of the interface.
(Optional) Indicates that a maintenance level is specified.
(Optional) Integer from 0 to 7 that identifies the maintenance level.
Modification
This command was introduced.
This command was integrated into Cisco IOS Release 12.4(11)T.
This command was integrated into Cisco IOS Release 12.2(33)SXH.
The detail and evc keywords and the evc-name argument were added.
This command was integrated into Cisco IOS Release 12.2(33)SXI2.
•
This command was integrated into Cisco IOS Release 12.2(33)MRA. This
release does not support the evc parameter.
This command was integrated into Cisco IOS Release 15.0(1)MR.
Independent of domain or interface
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
The evc keyword and evc-name argument are not supported in this
release.
OL-23890-01